Residential Battery Backup Autonomy Planner

Why home battery autonomy planning matters

Grid reliability is changing quickly as extreme weather, wildfire shutoffs, and transmission constraints strain distribution networks. Homeowners who invest in stationary batteries often do so after a stressful outage. Once the equipment is installed, however, questions remain: how long can the pack actually run the house, what combination of load shedding and solar recharge stretches runtime, and will the inverter hold up against appliance surges? Manufacturers advertise laboratory runtimes, yet real-world performance depends on depth of discharge limits, conversion losses, and the rhythm of household consumption. The Residential Battery Backup Autonomy Planner turns those variables into an hour-by-hour simulation so families can prepare realistic contingency plans.

Even a modest outage can stack complications. Refrigerators need to stay cold, well pumps must cycle, and internet routers keep remote workers online. Summer heat may require spot cooling or the ability to run ceiling fans throughout the night. Winter storms shift priorities toward circulation pumps and boiler controls. By quantifying how critical loads eat into stored energy, the planner helps households prioritize circuits for backup panels and rehearse what to unplug when the grid falls silent. It also reveals how daily solar production replenishes batteries, an especially important insight for homeowners who pair storage with rooftop photovoltaic arrays or portable folding panels.

The tool’s simulation accounts for electrical realities that news headlines rarely capture. Lithium-ion batteries typically last longest when the deepest discharge is limited to 70–90 percent of nameplate capacity. Converting direct current to alternating current incurs inverter losses. Solar production waxes and wanes during the day. When combined, these factors mean a headline-grabbing “13.5 kWh” battery often has closer to 10 kWh of usable energy for sustained loads. The planner invites users to enter their own DoD limit, inverter efficiency, solar harvest expectations, and planned load shedding so that the resulting schedule mirrors their home and habits rather than a marketing data sheet.

How the autonomy math works

The core calculation starts by determining usable energy after respecting depth-of-discharge guardrails and efficiency losses. If a battery bank has a nameplate capacity C (kWh), a depth of discharge limit d expressed as a decimal, and an inverter efficiency η, the usable energy U is given by the relation

. The hourly load draw L is computed by converting the average critical load from kilowatts into kilowatt-hours per hour and adjusting for planned load shedding. If a household typically needs 3 kW but plans to reduce usage by 20 percent, the effective hourly load becomes or 2.4 kWh consumed each hour.

Solar recharge is layered onto the model by distributing the specified daily energy harvest across six midday hours, reflecting the common bell-shaped production curve of photovoltaic arrays. Every hour, the script subtracts the load from the current state of charge, then adds the fractional solar contribution during daylight. The state of charge is never allowed to exceed the usable energy ceiling. The simulation stops once the battery reaches zero or the target outage horizon ends, whichever happens first. Runtime is the elapsed number of hours before depletion. Dividing runtime by 24 yields autonomy in days.

In addition to the main simulation, the planner assembles comparison scenarios. The baseline uses the user’s entries. Scenario two increases load shedding to 30 percent, reflecting an aggressive conservation plan that turns off additional appliances and defers laundry or dishwasher cycles. Scenario three models the impact of setting up extra solar, boosting the daily recharge by 50 percent while keeping the original load reduction. Each scenario reports usable energy, average load, modeled autonomy, and whether the resulting runtime meets the user’s stated horizon. These comparisons illustrate which lever—shedding, storage, or solar—moves the needle most within a given home.

Because surges can trip inverters even when average loads are modest, the script also checks whether the specified short-term surge exceeds the inverter’s continuous rating. While most inverters can handle brief overloads above their nameplate, sustained surges may trigger protective shutdowns. The planner therefore flags cases where the surge is more than 125 percent of the continuous rating, prompting users to confirm that their inverter can handle the demand or to plan sequencing strategies for high-draw appliances.

Worked example: planning for a winter ice storm

Imagine a household in Oklahoma with a 13.5 kWh lithium iron phosphate battery. To protect cycle life, they limit depth of discharge to 80 percent. Their hybrid inverter operates at 92 percent efficiency, and the unit can supply 7.6 kW continuously. The family wants to support 2.4 kW of average load during an outage—enough for a furnace blower, refrigerator, lights, well pump, and internet equipment. They expect occasional surges of 5.5 kW when the well pump and microwave overlap. A portable solar array should provide around 5 kWh per day even in cloudy winter conditions. The family wants confidence that they can bridge three-day outages, and they plan to shed 15 percent of normal consumption by turning off entertainment electronics and postponing laundry.

Plugging those numbers into the planner yields usable energy of 9.94 kWh. The hourly load after shedding becomes 2.04 kWh. Without solar, the battery would deplete in roughly 4.9 hours; however, with five kilowatt-hours of daily solar recharge spread over midday, the simulation shows that the battery avoids total depletion for 73 hours—just over three days. The daily table reveals that the state of charge dips to 28 percent by the end of day one, recovers to 41 percent after solar midday on day two, and never falls below 22 percent as long as the solar harvest materializes. The surge check indicates that 5.5 kW is comfortably below 125 percent of the inverter rating, so the equipment should tolerate those short bursts.

The scenario comparison highlights trade-offs. Staying with the current setup delivers 73 hours of autonomy, barely covering the three-day goal. Aggressive load shedding down to 70 percent of normal drops the hourly load to 1.68 kWh, extending autonomy beyond 96 hours, which creates a healthy buffer. Alternatively, adding more portable solar to reach 7.5 kWh per day, even while keeping the original 15 percent shed, also drives runtime past 96 hours. The table encourages the family to prepare two contingency plans: one emphasizing conservation if the weather remains overcast, and another leveraging extra panels when sunlight cooperates.

Comparison of resilience strategies

To make the trade-offs concrete, the planner automatically generates a strategy table. The baseline row represents the user’s current plan. The second row assumes deeper load shedding, while the third row models enhanced solar input. Homeowners can read across each row to see how usable energy, average load, and autonomy change. The inclusion of a qualitative yes/no column for meeting the outage horizon gives households a fast heuristic. A plan that fails to meet the horizon is not useless, but it alerts the family that they should schedule generator refueling, relocate vulnerable family members, or rewire additional circuits into the backup panel.

The table format encourages families to think beyond a single plan. It can be copied into a preparedness binder alongside checklists for transferring food to coolers, rationing hot water, or staging extension cords. Because the planner exports the full hourly state of charge as a CSV, technically inclined users can extend the analysis in spreadsheets, perhaps by modeling variable loads or overlaying historical solar production data from monitoring systems. Emergency managers can adapt the tool for community resilience workshops, letting neighbors compare how different levels of conservation influence aggregate load on microgrids.

Limitations and assumptions

While the autonomy planner is grounded in physical principles, it necessarily simplifies real systems. Batteries may reduce output at cold temperatures, and inverter efficiency varies with load. The script assumes a constant average load each hour, yet real homes see spikes when HVAC compressors cycle or ovens preheat. Users can approximate these effects by increasing the average load figure or by adding surge margins. Solar production is modeled as an even distribution across six daylight hours; clouds, snow, and shading can dramatically reduce harvest. The planner also assumes the battery starts the outage fully charged. In practice, grid interruptions can strike before a pack reaches 100 percent, especially if the utility cuts power early in the evening after a cloudy day.

Finally, the tool does not replace professional design guidance. Electric codes, transfer switch requirements, and warranty conditions vary by jurisdiction and manufacturer. Users should confirm allowable depth of discharge settings with their installer and check whether their inverter can ride through the surges they anticipate. Nonetheless, by quantifying how storage, load shedding, and solar interplay, the planner empowers households to make evidence-based preparedness decisions. Instead of guessing how many candles or ice bags to stockpile, families can simulate specific outage lengths and build clear playbooks for storms, wildfire PSPS events, or grid emergencies.